FirmwareX

From I-CubeX Wiki

Jump to: navigation, search

FirmwareX is a desktop utility to upload firmware to a digitizer. The features made available by the firmware can be configured with EditorX.

Releases

Version 8.3x uploads firmware 8.3 to a WiDig with hardware v8.0 or higher.

Version 8.2x uploads firmware 8.2 to a WiDig with hardware v8.0 or higher.

Version 8.1x uploads firmware 8.1 to a WiDig with hardware v8.0 or higher.

Version 8.0x uploads firmware 8.0 to a WiDig with hardware v8.0 or higher.

Version 7.5x uploads firmware 7.8 to a USB-microDig with hardware v7.5.

Version 7.5x uploads firmware 7.7 to a USB-microDig with hardware v7.5.

Version 7.5x uploads firmware 7.6 to a USB-microDig with hardware v7.5.

Version 7.5x uploads firmware 7.5 to a USB-microDig with hardware v7.5.

Version 7.4x uploads firmware 7.4 to a USB-microDig with hardware v7.2 or lower.

Version 7.3x uploads firmware 7.3 to a USB-microDig with hardware v7.2 or lower.

Version 7.2x uploads firmware 7.2 to a USB-microDig with hardware v7.2 or lower.

Version 7.1x uploads firmware 7.1 to a USB-microDig with hardware v7.2 or lower.

Version 6.4x uploads firmware 6.4 to a Wi-microDig with hardware v6.

Version 6.3x uploads firmware 6.3 to a Wi-microDig with hardware v6.

Version 6.2x uploads firmware 6.2 to a Wi-microDig with hardware v6.

Version 6.1x uploads firmware 6.1 to a Wi-microDig with hardware v6.

Retrieved from "https://infusionsystems.com/support/wiki/index.php?title=FirmwareX&oldid=6521"