Firmware-762 Message-111
LOW POWER AND COM (111, 6Fh)
This message contains the LED and serial (COM) port status of the USB-microDig. See the LOW POWER AND COM command for more information.
The [BODY] of the LOW POWER message is as follows:
000d0xyz: | d = 0; LEDs on |
d = 1; LEDs dimmed | |
x = 0; DTR high | |
x = 1; DTR low | |
y = 0; RTS low | |
y = 1; RTS high | |
z = 0; SUSP low (USB enabled) | |
z = 1; SUSP high (USB disabled) |