Firmware-75 Message-095

MIDI STATUS (95, 60h)

This message contains the activation status of the USB-microDig running status, active sensing and sampling loop marking. See the MIDI STATUS command for more information.

The [BODY] of the MIDI STATUS message is as follows:

00000zyx:	x = 0; MIDI running status enabled (channel voice MIDI messages only include a MIDI status byte when it changes)
	x = 1; MIDI running status disabled (each channel voice MIDI message includes a MIDI status byte)
	y = 0; MIDI active sensing disabled
	y = 1; MIDI active sensing enabled
	z = 0; Sampling interval marking disabled
	z = 1; Sampling interval marking enabled